Delays at HistoriFigs HQ…

Just as we were getting back into the groove, we have hit a snag on our order processing and fulfillment.

With a recent family tragedy out on the west coast, Alison has been away and will be out west until the middle of next week. I thought that I’d be able to stay on top of things – well at least enough to get things moving (even if at a slower pace). With recent weather (lots of snow) and farm chores (we are expecting both a new pony and baby goats) plus taking care of Liam, I’ve been unable to spend very much time on HistoriFigs business related tasks. As such I have a rather large backlog of orders to process and fulfill.

Orders have been going out, but very slowly, I expect more by the end of the week, but it will be at least the 15th of March before we are caught up again.

SYW Cavalry in N-Gauge…

This past weekend, made some new molds for the SYW Cavalry in N-gauge.
The figures in this new mold are:

FNC-11 – Cuirassier (in tricorne)
FNC-12 – Dragoon (in tricorne)
FNC-13 – Hussar, in busby
FNC-14 – Hussar, in winged hat
FNC-15 – Horse Grenadier, mitre

I’ll pick up the 3 AWI models in the next week or two. The new molds produce nice, clean castings. If you’ve wanted to build SYW cavalry in N-Gauge there is not better time than the present!

More new N-gauge molds as well as new N-gauge figures in the near future (by the end of the month)…

The Carden-Loyd Tankette…

I have finally finished the production mold for the Joseph Morschauser designed model of the 20mm Carden-Loyd Tankette…

This is a vintage model that was designed by Joseph Morschauser and sold by Jack Scruby. It is not a perfect model, and is not up to modern standards of detail, but it is a piece of our war gaming history and is present as such.

In the accompanying picture we see two models. The one on the right is the Master that Scruby and HistoriFigs have used for production molds. On the left we see a current production model. In the original model Morschauser used a finishing nail for the MG, and we have done the same (each model will be supplied with a bras plated finishing nail). I thought about casting the gun, but anything I could cast would bend far too easily, so I felt that in keeping with the sprit of the model the finishing nail would be appropriate.

These models are cast on demand (well, I will always have a few in stock), so orders will not be turned around over night (please allow 5 days for processing), and sell for $2.40 each. If you would like a six pack, the price is $12.50 – need an even dozen, $24.00. For shipping calculations please figure as 10 models to the pound. Order by name: 20mm Carden-Loyd Tankette.

20mm Carden-Loyd Tankette

The Carden-Loyd Tankette is possibly one of the great success stories of the inter-war years…

British developed, reasonably reliable and weighing in at less than 2 tons, this was less a light tank and more of a tracked machine gun transport. The Carden-Loyd tankette was a classic tankette design of the inter-war period. It was license-built by several countries and became the basis of several designs produced in several different countries.

Given the lean financial climate of the time, one of the attractive features of the Carden-Loyd tankette was that is was very cheap to produce. Production ran from 1927 until 1935. A total in excess of 400 units were built during this time.

Carden-Loyd tankette was primarily intended to carry machine guns or mortars. With its modest combat abilities, the vehicle was used primarily in support roles. The British Army used at least 300 of Mark VI tankettes in several variants, mostly as machine gun carries, but also as light gun tractors, mortar carriers or smoke projector vehicles. The remainder of the production was purchased by other nations such as: France (UE series), Italy (CV series), USSR (T27), Poland (TK series), and Czechoslovakia (MU4). Dozens more nations simply had Carden-Loyd manufacture the vehicle to their own specifications.

1 February 2007…

We are still having internet connectivity issues, so email response may be slow. I really hope this get cleared up soon!

We, well I had set a goal of being 100% caught up on orders by the end of January. Well we came close, but didn’t quirt make. As far as production goes, we got close – only three short of our goal. On the shipping end we didn’t come as close – about six or maybe 7 orders sitting on the finishing table (final checks and packing left to do). I suspect that sometime late next week we should be caught up with all open back orders. Once caught up we should be able to stay on top of incoming orders and get back to shorter shipping/fulfillment times.

All this focus on production cause a few new projects to slip, but we figured that it would be better to catch up on orders. A few new figures and a few new molds should be ready to announce within the next week (two at most).

New February Specials will be posted later today or tomorrow, so be sure to check back for the new specials for February.

Interent problems…

We’ve had some internet connectivity downtime the past few days. I’m still not sure where the problem is/was – with satellite internet it is hard to tell sometimes…

Things were back to normal this morning, which leads me to believe that problem, was not with our hardware, so maybe all is well.

Anyhow, if you waiting on email from us, it might be a little delayed due to our connectivity issues, but I think we shall be caught up on email by end of tomorrow (1 Feb 2007).

More news soon…